| Wall Hatches Fire Rated |
|---|
Provides access through fire rated plaster board or concrete walls. Simple to Install. Large range of Sizes.
B350: -/120/90 Fire Rating.
B351: -/60/60 Fire Rating.
Combined B350 & B351 Datasheet.. |
B350 sizes: 300mm x 300mm, 510mm x 510mm, 600mm x 600mm, 800mm x 600mm, & 920mm x 620mm.
B351 sizes: 300mm x 300mm, 400mm x 400mm, 510mm x 510mm, 710mm x 510mm, 600mm x 600mm, 800mm x 600mm & 900mm x 600mm.
|
 |
| Floor Hatches Fire Rated |
|---|
Firepro B355 Floor Fire Hatch is designed for lift motor rooms and similar situations where a very large access space is required from above a fire compartment.
B355 is designed for use in concrete floors.
Datasheet B355. |
Fire Rating up to -/120/120 (2 hour FRL).
Simple and Fast to Install.
6 Stock sizes.
Access to spaces up to 1500mm wide and any length. |
 |
| Ceiling Hatches Fire Rated |
|---|
Firepro B359 fire hatches are designed to sit flush with the ceiling surface leaving only a narrow opening joint around the face with no protruding hinges.
The hatch is secured bu a locking key. FRR 1 hour.
Datasheet B359. |
Available sizes: 300mm x 300mm, 400mm x 400mm, 450mm x 450mm, 530mm x 530mm, & 600mm x 600mm. |
 |
| Wall & Ceiling Hatches |
|---|
Centabuild H101 Access Hatch provide an economical answer to access requirements through non-fire rated walls and ceilings.
The 560mm x 560mm size hatch allows head & shoulder access into ceiling voids.
Smaller sizes are for situations where hand access is required through non fire-rated walls and ceilings.
Datasheet H101. |
Available sizes: 200mm x 200mm, 300mm x 300mm, 400mm x 400mm, 450mm x 450mm, & 560mm x 560mm. |
 |
Centabuild H104 Quick Fit Hatches provide easy but secure access into ceiling and wall voids.
The hatch consists of a steel frame and pivot hinged steel door secured by a universal (allen key) lock.
Installation is made fast and simple by the provision of integral flange and push out tabs.
Datasheet H104. |
Available sizes: 300mm x 300mm, 450mm x 450mm, & 560mm x 560mm. |
|
Centabuild H111 Hatch Trim provides: A neat and easily installed finishing trim to ceiling and loft access panels.
It can be installed in minutes (no mitres to cut) to suit any square or rectangular opening up to 600 x 600mm.
Manufactured from high impact white PVC.
HATCH TRIM ensures a professional finish that does not require painting.
May be painted if desired to match other finishes.
Datasheet H111. |
|
|
Centabuild H105, H106: for installations where larger hatches or noise dampening is required, and/or where security is important.
The hatches can be installed during construction or after the ceiling is in-place.
H106 hatches are designed to fit flush with the ceiling leaving only a narrow opening joint around the edges with no visible hinges.
The hatch is secured with a lock which can be individually or identically keyed.
Alternatively a universal lock option is available on most sizes.
The hatch panel is made from board with an STC of 29.
Sound dampening seals are provided around the joint of the panel and the frame.
An integral plasterers angle is standard with the complete range of H106.
Datasheet H105 & H106. |
See datasheet for the full range of sizes. |
 |
